Cartonfolk Request a Quote
Home / Packaging guides / Mailer and folding carton dielines

Start your artwork on a dieline

These two editable drawings give your designer a box to work around. Both open at full size in millimetres. Use the 50 mm scale bar to check the import.

Flat drawing of four folding carton panels, with tuck flaps at opposite ends.

Reverse tuck carton

Target inside size 60 × 35 × 100 mm. The tall front panel suits a single retail bottle. Keep the barcode clear of the side seam.

Download editable SVG ↓
Hinged mailer layout with a front tuck, side dust flaps and four glue tabs.

Hinged mailer with glued corners

Target inside size 180 × 120 × 45 mm. The lid and tray share a hinge. Mark up the inside and outside artwork on separate copies.

Download editable SVG ↓

Before these go to print

Both files are layout examples, revision 1.0. The cut, crease, artwork and notes sit in separate named groups. Place your design in ARTWORK and send an annotated PDF showing which way each panel reads.

For an order, send the filled product size and the board you have in mind. Our team needs those to set the folds, glue areas and clearances, then issue the job-specific dieline for sign-off. Wait for that revision before releasing artwork to print.

View folding cartons ↗Request a dieline for your box ↗